MAXMA ULTRA S-EP Thermal CTP Plate is for offset lithography printing.
With our new-developing technology, the double-layered coating emulsion provides higher runs and sensitivity.It has combined with high sensitivity, anti-scratch and high resistance against alkaline chemicals.As well as the anti-corrosion, Maxma ULTRA S-EP has provided users with impressive impressions and image stability.
Transmission Distance：60M（The actual distance is subject to the test environment）
Integrated Bluetooth low energy stack
GAP, GATT, L2CAP, SMP Bluetooth low energy profiles
Compliance: BQB BLE5.0, FCC, IC(Canada), CE ETSI RED…etc. worldwide RF Regulations.
Transmit power :-21dBm~+5dBm typical
Receiver sensitivity: -97dBm typical
In-System-Programmable Flash 128KB SRAM 8KB
10 programmable GPIO
Programmable ARM Cortex-M3 processor for embedding full applications
Low current consumption :Shutdown. No clocks running, no retention: 150nA(Typical)
Description
HY-40R204S1C integrates all features required for a Bluetooth Low power aplication ，which is a highly integrated Bluetooth 5.0 module targeted for low power Smart Devices and loT applications. HY-40R204SICC also provides 10 programmable GPIO for low power product applications.
HY-40R204S1C offers all Bluetooth low energy features: radio, stack, profiles and application space for customer applications. The module also provides flexible hardware interfaces to connect sensors.
HY-40R204S1C can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries.
In lowest power shutdown mode it consumes only 0.15uA and will wake up in few microseconds.
HY-40R204S1C transmission distance of 60meter or more. (At face to face, free space, 1.2 Meter high from Ground for testing).
Bluetooth IC：TTC2640R2 4*4*0.9mm 32pin IC,Used TI CC2640R2 die chip
TPMS stands for Tire Pressure Monitoring System, which is an auxiliary system installed on car tires to monitor tire pressure in real time. The tire pressure monitoring system, airbags, and ABS systems constitute three major safety systems for automobiles. It installs a transmitter containing a high-sensitivity temperature sensor and pressure sensor chip on each wheel, and monitors the temperature and pressure of the tire in real time in the driving or stationary state, and transmits it to the controller by radio frequency. When the tire leaks or the air pressure is low, the alarm will be issued to ensure the driving safety.
More special
BLE 4.2
US Imported CPU
Real time tire temp monitoring
Real time tire pressure monitoring
Sensorless monitoring
APP smart reminder
Anti-interference
Good stability
Ultra low power bluetooth 5.1 chip CC2640R2F
Equipped with a new generation of TI SimpleLinkTM Bluetooth 5.1 Low energy Wireless triple-core processor, Brings a very fast experience with extremely low power consumption.
Ture sensorless alarm
Different from the Bluetooth tire pressure products on marketing, our tire pressure monioring products only need to pre-install APP in advance and turn on the mobile phone’s Bluetooth, Normal information even without opening APP.
Transmission Distance：80M（The actual distance is subject to the test environment）
Integrated Bluetooth low energy stack
GAP, GATT, L2CAP, SMP Bluetooth low energy profiles
Compliance: BQB BLE5.0, FCC, IC(Canada), CE ETSI RED…etc. worldwide RF Regulations.
Transmit power :-21dBm~+5dBm typical
Receiver sensitivity: -97dBm typical
In-System-Programmable Flash 128KB SRAM 8KB
10 programmable GPIO
Programmable ARM Cortex-M3 processor for embedding full applications
Low current consumption :Shutdown. No clocks running, no retention: 150nA(Typical)
HY-40R204 integrates all features required for a Bluetooth Low power aplication ，which is a highly integrated Bluetooth 5.0 module targeted for low power Smart Devices and loT applications.
HY-40R204 also provides 10 programmable GPIO for low power product applications and provides selection of PCB antennas, ceramic antennas, IPEX, wire antennas.
HY-40R204 offers all Bluetooth low energy features: radio, stack, profiles and application space for customer applications. The module also provides flexible hardware interfaces to connect sensors.
HY-40R204 can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries.
in lowest power shutdown mode it consumes only 0.15uA and will wake up in few microseconds.
HY-40R204 transmission distance of 100meter or more. (At face to face, free space, 1.2 Meter high from Ground for testing).
Bluetooth IC：TTC2640R2 4*4*0.9mm 32pin IC,Used TI CC2640R2 die chip
Bluetooth v4.2 and v.5.0 single mode hardware compliant
Antenna Type：Ceramic Antennas
Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
Device Temperature Grade 2: –40°C to +105°C
Ambient Operating Temperature Range
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C3
Integrated Bluetooth low energy stack
GAP, GATT, L2CAP, SMP Bluetooth low energy profiles
Compliance Bluetooth BQB BLE 4.2 and 5.0, And Compliance worldwide RF Regulations. Example: China 3C, Europe CE ETSI RED, America FCC, Canada IC, Japan TELEC, Korea KC…etc.
IC Transmit power :+5 dBm typical
IC Receiver sensitivity: -97dBm typical
Ultra low current consumption : Standy by mode : 3.6uA ( with Cache RTC, CPU, RAM and partial register retention).
Shutdown mode:. No clocks running, no retention: 150 nA ( Typical)
Programmable ARM Cortex-M3 processor for embedding full applications
HY-40Q101 Bluetooth low energy single mode module is for AEC-Q100 Qualified Automotive
Applications , Automotive Device Specification Temperature Grade 2: ( –40°C to +105°C),
HY-40Q101 is a single mode device, targeted for low power energy sensors and accessories.
HY-40Q101 offers all Bluetooth low energy features: radio, stack, profiles and application space for automotive applications. The module also provides flexible hardware interfaces to connect sensors.
HY-40Q101 can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries.
in lowest power shutdown mode it consumes only 0.15uA and will wake up in few microseconds.
HY-40Q101 transmission distance of 80 meter or more. (At face to face, free space, 1.2 Meter high from Ground for testing, depend on Antenna gain & Antenna efficiency ).
Our companys forehead thermometer has the following characteristics:：Efficient and safe,Results in 1 second,Simple and convenient operation,Fast and accurate,Have medical qualifications,For products that beat COVID-19.Welcome to inquire and purchase.
Technical specifications
Working environment: ambient temperature 16 ℃ -35 ℃, relative humidity: ≤85%
Storage and transportation: -20 ℃ ± 55 ℃, relative humidity: ≤93% atmospheric pressure difference: 90kPa-106 kPa
Memory function: automatic memory of 50 groups of data
Automatic shutdown: ≤18s
Product weight: 86g (excluding battery)
Power supply voltage: DC3V
Product Features
Efficient and safe
Results in 1 second
Simple and convenient operation
Fast and accurate
Have medical qualifications
For products that beat COVID-19
Email：alexwu1517@gmail.com
WhatsApp：+86 13751169761
WeChat：+86 13751169761
www.leaves-med.com
Shining Jins Enterprise Co., Ltd. specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan.
Production capacity:
T-Yoke/Pole Piece :
Diameter of Piece : 28mm up to 250mm
Diameter of Pole : 10mm up to 70mm
Length of Pole : 6mm up to 80mm
Thickness of Piece : 2mm up to 30mm
U-Yoke/Neodymium Yoke :
Outside - Diameter of U-Yoke : 30mm up to 100mm
ln-side - Diameter of U-Yoke : 12mm up to 90mm
High of U-Yoke : 5mm up to 70mm
Thickness of Piece : 2mm up to 30mm
Depth of U-Yoke : According to customer design
ATO relay test set can well protect your relay, circuit breaker device, digital display, 3-phase relat tester to quickly detect errors, protect equipment from malfunctioning, to avoid unnecessary losses for you, to protect the circuit functions, and complete functions.
ATO relay test set is a universal solution for testing all types of protective relays. Superior performance, can also test high load electromechanical relays with very high power requirements. This product is loved by engineers.
WE ARE CURRENTLY ON PROMO(BUY 2 GET 1 FREE) contact me for more price list
Apple iPhone 11, 11 Pro/11 Pro Max (Unlocked) A2218 (CDMA + GSM)
In stock and available NOW!!!!!
New Original Unlocked Apple iPhone 11 Pro Max 64GB,128GB,256GB,512GB
Contact us for more price list
Brand New Canon EOS 5D Mark II 21MP DSLR Camera+with 24-105mm IS L Lens
================================================
Price $900usd
1 Canon EOS 5D Mark II Body
1 Eyecup Eb
1 (EW-EOS5DMKII) Wide Neck Strap
1 (STV-250N) Stereo Video Cable
1 (IFC-200U) USB Interface Cable IFC-200U
1 (LC-E6) Battery Charger
1 (LP-E6) Battery Pack
1 EOS Digital Solution Disk
1 Software Instruction Manual
Brand New Nikon D300 Digital SLR w/18-200mm VR Lens
==================================
Price..$800
Package Content
1 Nikon D300 DSLR Camera
2 User Manuals
1 Software Suite
1 AV Cable
1 Mini USB Data Cable
1 Power Cord
1 MH-18a Battery Changer MH-18a
1 EN-EL3e Li-ion Battery
1 Neck Strap
Brand new Nikon D3X SLR Camera Body
=================================
Price:$1,300
Includes
Nikon D3X Digital SLR Camera Body
Rechargeable Li-ion Battery EN-EL4a
Quick Charger MH-22
USB Cable UC-E4
Audio Video Cable EG-D2
Camera Strap AN-D3X
Body Cap BF-1A
Accessory Shoe Cover BS-2
Eyepiece DK-17
Battery Chamber Cover BL-4
USB Cable Clip
Software Suite CD-ROM
Serious Buyer's Only should contact...
Contact Email : welectronicsinquiry@gmail.com
Online WhatsApp Chat : +1 (614)-465-6490
