Añadido Recientemente

10.04.2021
World Cheapest FFP3 Valveless Respirator Face Mask
  • World Cheapest FFP3 Valveless Respirator Face Mask
  • Vertical fold-flat FFP3 respirator face mask, without exhalation valve
    Welded elastic earloops
    Imbedded nose clip, sponge nose lining
    CE approved by UNIVERSAL (NB no. 2163)
    Tested and certified according to EN 149:2001+A1:2009
    Class: FFP3 NR

    This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009.

    EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles.

    This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance.

    EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols.

    FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
07.04.2021
06.04.2021
Auto BiB Filling Machine Bag in Box Cartoning Line
  • Auto BiB Filling Machine Bag in Box Cartoning Line
  • Fully-automatic Bag-in-Box (BiB) Filling and Cartoning Line

    The Fully-automatic Filling and Cartoning Line includes:
    1. Fully-automatic Bag-in-Box Filling Machine
    2. Hot Melt Glue Carton Erector
    3. Bag Inserter
    4. Hot Glue Box Sealer
    5. Conveying Systems

    The whole line is fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. Made in China, but built at high quality level.

    Procedures of the whole line:
    1) Automatically feed bags.
    2) Automatically pull cap, fill, cap and cut bags apart.
    3) Automatically erect cartons and seal bottoms with hot melt glue.
    4) Automatically insert filled bags in boxes.
    5) Automatically seal the box tops with hot melt glue.

    1. Fully-automatic Bag in Box Filling Machine
    The Fully-automatic Bag in Box Filling Machine is especially for filling spout-fitted bags with a wide range of liquids like drinking water, post mix syrup coke, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required.

    This filling machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection. Grade 304 stainless steel body and 316L stainless steel fluid-contact parts.

    Specifications:
    Applicable bags: pre-cut continuous module or WEB type spout bags, 3-25 litres.
    Filling capacity:
    500 bags/hour for 5 litres
    400 bags/hour for 10 litres
    300 bags/hour for 20 litres
    Power: 3.0KW
    Compressed air: 6-8bar, 1.5m3/h.

    2. Carton Erector (Erecting carton and sealing bottom)
    Erecting capacity: 15 cartons/min
    Grade 304 stainless steel construction
    Hot Melt Glue System: Nordson

    3. Bag Inserter (Inserting filled bags in cartons)
    Inserting capacity: 15 bags/min
    Grade 304 stainless steel body

    4. Hot Melt Glue Box Sealer (Closing and sealing top)
    Sealing capacity: 20 cartons/min
    Grade 304 stainless steel construction
    Hot Melt Glue System: Nordson

    5. Conveying Systems
    Grade 304 stainless steel

    Contact us today for a competitive price.
02.04.2021
Portable Transformer Oil BDV Tester Set,Oil Tester
  • Portable Transformer Oil BDV Tester Set,Oil Tester
  • Application:
    ST Transformer oil bdv tester set is apply for speedy and accurate testing of dielectric strength of transformer and circuit breaker oil under test room condition in accordance with IEC international standard.


    Features:
    1. withstand voltage test in the range of 0 ~ 80KV.
    2. Large-screen LCD.
    3. Simple operation
    4.Store 100 experimental results, and display the currentenvironment temperature and humidity.
    5. The whole process easy to control.
    6.With overvoltage, overcurrent, limiting protection, in order to ensure the safety operation.
    7.With a temperature measurement display function and system clock display.
    8.Standard RS232 interface.
    9. PC application software is provided to upload test data to make WORD test report
    10. Menu management, data input simple and convenient.
    11. The instrument adopts intermediate frequency induction heating and PID temperature control algorithm. The oil cup and the heating body are non-contact, heating evenly, fast and easy to control.
    12. Empty electrode cup calibration function. Measure the capacitance and dielectric loss factor of the empty electrode cup to judge the cleaning and assembly status of the empty electrode cup. The calibration data is automatically saved to facilitate accurate calculation of relative permittivity and DC resistivity.
    13. The instrument adopts intermediate frequency induction heating and PID temperature control algorithm. The oil cup and the heating body are non-contact, heating evenly, fast and easy to control
    Specifications:
    1 Output voltage AC 0~80KV/AC 0~100KV
    2 Rate of voltage rise 2KV/s±10%
    3 Measuring precision 3%RDG+0.3%FS
    4 Test times setting 1~9
    5 Mixing time setting 0~99 second
    6 Waiting time setting 0-9 minute 59second
    7 Maximum storage capacity 100 groups of test data
    8 Test standards IEC60156
    9 Display 256*128 LCD
    10 Rated power supply AC 220V±10% 50Hz/60Hz
    11 Environment temperatures 0-50°C
    12 Relative humidity ≤80%RH
    13 Size 530×550×530mm
    14 Weight 48kg


    Please contact Assen for more details.
  • € 2,000.00
High Reliable vacuum lubricating oil purification
  • High Reliable vacuum lubricating oil purification
  • By using the ASSEN hydraulic oil filtration machine you will benefit by the following:
    Extended lubricating oil life
    Reduced machine downtime
    Less equipment maintenance


    TYA

    Application:
    Hydraulic oil contaminated by water, gas, impurities etc. will effect lubrication system of machine and equipment, ASSEN TYA hydraulic oil filtration machine has perfect capability of removing impurities, mass and deep precision purification material from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery. TYA lubricating oil filtering plant is also equipped with permanent magnet filter to filter ferruginous impurities.

    Feature:
    1.Unique water/gas removal system, which adopts stereo-evaporating technology, multi-oil water separation technology, enabling fast removal of water, and gas in the oil.
    2.Optimazed electric heating system with automatic constant temperature controller ensures that oil temperature to be even and stable.
    3.An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
    4.Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.


    Please contact Assen for more details
  • € 5,000.00
High Vacuum Transformer Oil Purification Plant
  • High Vacuum Transformer Oil Purification Plant
  • Application:
    Oils inside transformers are mainly for insulating purpose- apart from which they also suppress corona and arcing, and also act as coolants inside the machines. These oils must be maintained absolutely clean and dry in order to achieve and sustain the optimal insulating performance and dielectric strength. Here rises the need for transformer oil purification process. ASSEN ZYD Transformer Oil Purification Machine is the key to transformer reliability, performance and longevity. Your transformer's insulating oil should be free from moisture, dissolved gases and particles that accumulate as the oil ages. Even some new oils may require treatment to limit these contents to acceptable levels.

    Features:
    1. Expectations on an effective oil plant for treatment of insulating oil.
    2. Suitable for oil treatment, vacuum oil injection and cyclic hot oil drying in the installation and maintenance of large capacity transformers.
    3. Easy and failsafe operation.
    4. On-line measuring and recording of process parameters.

    Technical Data
    Parameters Unit ZYD-30 ZYD-50 ZYD-100 ZYD-150 ZYD-200 ZYD-250 ZYD-300
    Flow rate L/min 30 50 100 150 200 250 300
    Working vacuum MPa 0.08 ~ 0.099
    Working Pressure MPa ≤0.3
    Temperature Range ℃ 20 ~ 80
    Power Three Phase 50HZ380V(as per the customer's requirements)
    Working Noise dB(A) 75 75 75 80 80 80 80
    Heating Power kW 30 30 45 60 75 90 120
    Total Power kW 35.5 37.5 52.5 71.4 86.5 102.5 135
    Inlet/Outlet mm φ25 φ32 φ42 φ50 φ50 φ60 φ60
    Weight kg 600 800 1050 1400 1800 2000 2200
    Overall Length mm 1050 1100 1200 1450 1600 1800 1900
    Width mm 750 800 950 950 1100 1200 1200
    Height mm 1350 1400 1500 1650 1800 1900 1900






    Aftre treatment
    Moisture PPM ≤3
    Gas content % ≤0.01
    Impurity size μ ≤1 (no free carbon)
    Breakdown voltage kV ≥75
    IFT dynes/cm ≥40
    Acid value mgKOH/g ≤0.03
    Dielectric loss factors tgδ(90°C) ≤0.001


    Please contact Assen for more details.
  • € 6,000.00
25.03.2021
Forging solutions
  • Forging solutions
  • Herrsav Integrated Co., propose our ability for Forging Industry Solution,

    Upon fastener industry demand, our machinery line and supply chain is very solid to meet your needs. Be free to send your drawing, we will bring you parts better than it is.

    Tooling parts condition from Ti coating, PVD coating, or heat treatment needs, upon material like SKD61(1.2344), M2(W6Mo5Cr4C2), s390, SKH9, etc, are all high speed alloy stell most chosen and estimated upon equirements.

    The core competence of this company, likely to made strong conncection and best understanding of knowhow itself, take assign upon experience.
22.03.2021
3in1 Stand-Up Pouch Case Packer Cartoning Machine
  • 3in1 Stand-Up Pouch Case Packer Cartoning Machine
  • Fully-automatic Form-Insert-Seal 3-in-1 Case Packer | Monoblock Cartoning Machine for Stand-Up Pouches

    This is a cartoning machine for stand-up pouches. A delta robot is employed for picking and inserting pouches in cartons. Carton forming, pouch inserting and carton sealing 3-in-1. This monoblock case packer is easy to be installed and an ideal cartoning machine for the COVID-19 period as it is the diffcult time to have technicians for installation from suppliers abroad.

    Features:
    1. Form-insert-seal 3-in-1, with a smaller footprint.
    2. Easy to install.
    3. System pauses and alert if cartons or tapes are empty.

    Specifications:
    Capacity: 450 cartons, 2700 x 1 litre pouches/hour
    Compressed air: 0.6-0.8MPa
    Max tape roll diameter: 300mm
    System weight: 6,000kg
    Power supply: 3 phases, customized voltage
    System dimensions: 5,300*2,800*2,800mm.
    Power consumption: 5kW
18.03.2021
Professional Sludge Dewatering Machine
  • Professional Sludge Dewatering Machine
  • High Efficiency Dewatering Press for Medium-Sized Operations
    Professional waste water treatment for hospitals, plants, recycling plants and more. The machine uses a screw extrusion as its main driving mechanism to process sewage and sludge water. This solid-liquid separation device reaches new heights in terms of waste water treatment, and by changing the screw diameter and distance, even greater separation can be achieved.

    WORKING PRINCIPLE
    The main mechanism of the Sludge Dewatering Press is made up of multiple fixed & movable annular plates with the screw shaft running through them. The front of the machine is where the thickening compartment is located and at the very end is where the dewatering compartment is located. The machine both thickens and dewaters sludge in one process, which means it has replaced traditional filtering screens as well as centrifugal filtration methods.

    DEWATERING PRINCIPLE
    After having been thickened up in the thickening compartment, the sludge is transported to the dewatering compartment. During this process, high pressure is produced because the gradual decrease in filter space and screw distance cause the back plate to be clogged. As the volume decreases, the effect of dewatering is achieved.


    DRY SLUDGE TREATMENT CAPACITY (50 ~ 70 kg/L)

    10000 mg/L: ~5m³/h
    20000 mg/L: ~2.5m³/h
    30000 mg/L: ~2m³/h
    40000 mg/L: ~1.5m³
    50000 mg/L: ~1.4m³

    MOTOR POWER

    Screw Shaft: 0.18
    Mixer: 0.18
    Total: 0.36

    WASHING WATER PRESSURE

    Washing Water Pressure: 0.1Mpa ~ 0.2Mpa (Without high pressure flushing equipment)
    Mixer: 0.18
    Washing Water Qty (L/h): 40
    Maintenance Frequency: 5 min/h
    Service Life of Screw Shaft: 10 Years
    Service Life of Moving Rings: 5 Years

    TECHNICAL SPECIFICATIONS

    Model: 144600
    Screw Specification: 300 x 1
    Distance from mud cake outlet to ground: 500 mm
    Operating Weight: 1300 kg
    Model: 144600
    Type: sludge treatment
    Noise Level: Low
    Material: SS304, Steel
    Water Consumption: Low
    Weight: 900kg
    Sludge Type: Liquid and semi-liquid
    Dimensions: 3340*920*1750
    Handling Capacity: 50 ~ 70 kg/L
    Warranty: 18 Months
    Motor: 0.36
  • € 1.00
04.03.2021
One-Way 15 Litre PET Bottle Blowing Making Machine
  • One-Way 15 Litre PET Bottle Blowing Making Machine
  • Fully-automatic One-Way 15 Litre Bottle Making Machine | 15L PET Bottle Blow Molding Machine

    Fed material: PET Preforms
    Bottle volume: 15 Litre
    Production capacity: 300-350 bottles/hour

    Technical Data:
    Max bottle length: 450mm
    Max bottle diameter: 350mm
    Max mould plate dimensions; 520x600mm
    Max mould thickness: 400mm
    Clamping force: 300KN
    Power: 45KW
    Main body dimensions: 3.7x1.6x2.2m

    We also have a 15 Litre Polycarbonate (PC) bottle making machine.
01.03.2021
FFP2 FFP3 Mask Making Machine Production Line CN
  • FFP2 FFP3 Mask Making Machine Production Line CN
  • Fully-automatic Vertical Fold-Flat Mask Making Machine | FFP2/FFP3 Valveless or Valved Respirtor Production Line

    This production line for producing FFP2/FFP3 vertical fold-flat face masks and it makes 4-to-6-ply respirators/masks automatically by the following procedures.
    1) Unwinding and feeding non-woven fabrics;
    2) Welding, laminating fabrics and cutting holes for exhalation valves (optional);
    3) Welding exhalation valves (optional);
    4) Feeding and positioning nosepieces (imbedded);
    5) Printing logo and text on one side of mask blank;
    6) Feeding and welding earloops;
    7) Folding masks;
    8) Cutting the masks.

    The above process is done automatically and continuously by PLC.

    Features:
    1) Fully-automatic.
    2) High-speed and speed adjustable.
    3) Multiple ultrasonic systems employed produce reliable welding.
    4) Easy to use. The touch-screen control system makes operation easy.
    5) Alarm when the fed material breaks or is in short.
    6) A counting system makes the quantity of produced masks visible and make it possible to set the mask quantity of each stack for the conveyors.

    Specifications:
    Power supply: 10 kW
    Capacity: 40-50 pcs/min
    Weight: 4,650 kg
    Dimensions: 13,000(L)*2,000(W)* 2,100(H)mm
    Site level: class 100,000 cleanroom
    Compressed air: 6 bar, pre-filtered, 23L/min
N95 N99 Respirator Mask Machine Production Line CN
  • N95 N99 Respirator Mask Machine Production Line CN
  • Fully-automatic Vertical Fold-Flat Mask Making Machine | N95/N99 Valveless or Valved Respirtor Production Line

    This production line for producing N95/N99 vertical fold-flat face masks and it makes 4-to-6-ply respirators/masks automatically by the following procedures.
    1) Unwinding and feeding non-woven fabrics;
    2) Welding, laminating fabrics and cutting holes for exhalation valves (optional);
    3) Welding exhalation valves (optional);
    4) Feeding and positioning nosepieces (imbedded);
    5) Printing logo and text on one side of mask blank;
    6) Feeding and welding earloops;
    7) Folding masks;
    8) Cutting the masks.

    The above process is done automatically and continuously by PLC.

    Features:
    1) Fully-automatic.
    2) High-speed and speed adjustable.
    3) Multiple ultrasonic systems employed produce reliable welding.
    4) Easy to use. The touch-screen control system makes operation easy.
    5) Alarm when the fed material breaks or is in short.
    6) A counting system makes the quantity of produced masks visible and make it possible to set the mask quantity of each stack for the conveyors.

    Specifications:
    Power supply: 10 kW
    Capacity: 40-50 pcs/min
    Weight: 4,650 kg
    Dimensions: 13,000(L)*2,000(W)* 2,100(H)mm
    Site level: class 100,000 cleanroom
    Compressed air: 6 bar, pre-filtered, 23L/min
Fully-auto Surgical Mask Machine Production Line
  • Fully-auto Surgical Mask Machine Production Line
  • Fully-automatic Medical Face Mask Making Machine | Surgical Mask Production Line

    This mask production line is for making surgical face masks and the machine produces 3-to-4-ply masks automatically by the following procedures.
    - Unwinding and feeding non-woven fabrics
    - Folding and laminating fabrics
    - Feeding and positioning nose bars
    - Welding and cutting the masks
    - Feeding and welding elastics

    The above process is done automatically and continuously by PLC.

    Features:
    1) Fully-automatic.
    2) High-speed and speed adjustable.
    3) Multiple ultrasonic systems employed produce reliable welding.
    4) Easy to use. The touch-screen control system makes operation easy.
    5) Alarm when the fed material breaks or is in short.
    6) A counting system makes the quantity of produced masks visible and make it possible to set the mask quantity of each stack for the conveyors.

    Specifications:
    Power: 9 kW
    Capacity: max. 60 pcs/min
    Weight: 4500 kg
    Dimensions: 6800(L)*4800(W)*1988(H)mm

    Years' experience of designing and manufacturing mask making machines, not a beginner by reference to only drawings.
    30 days delivery lead time.

    We also have 3-ply masks to be supplied. They are made of virgin materials, odorless and the quality is beyond most of the other suppliers'.
19.02.2021
Wood grain color coated aluminum sheet for Time la
  • Wood grain color coated aluminum sheet for Time la
  • Product Details

    Features & Benefits

    1. Perfect weatherability, high strength, no special maintenance

    2. Convenient construction, short working time

    3.Excellent machining heat insulation, sound insulation property and perfect fireproof performance

    4. High plasticity, good impact resistance, quakeproof performance and Reduceing buildings load

    5.Good smoothingness, lightweight and rigid,beautiful and cheap

    6. Various colors available

    7. Simple machining equipments,processing in spot.

    Roofing, Ceiling, ACP.wall cladding.facades.roofs and canopies.ceilings.signboards.blind window.display platforms.electrical panels.etc

    Packing Details:the aluminum sheets are covered with plastic film/kraft paper, put into drier, fastened with plastic/steel belts, then packed on seaworthy export wooden pallets
  • € 1,200.00
16.02.2021
SCARPE USATE AUTUNNALI INVERNALI
  • SCARPE USATE AUTUNNALI INVERNALI
  • Selezione di scarpe usate miste autunnali invernali : donna, uomo bambino, comprese scarpe sportive . Offerta speciale per il mese di FEBBRAIO 2021.Imballaggio : sacchi da 25 Kg
  • Página de 65
Cargando…
Cargando…
Cargando…
Cargando…
Cargando…
Iniciar sesión
Nombre de usuario
Contraseña
¿Has olvidado tu contraseña? Recordar