Vertical fold-flat FFP3 respirator face mask, without exhalation valve
Welded elastic earloops
Imbedded nose clip, sponge nose lining
CE approved by UNIVERSAL (NB no. 2163)
Tested and certified according to EN 149:2001+A1:2009
Class: FFP3 NR
This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009.
EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles.
This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance.
EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols.
FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
Selezione di scarpe usate miste autunnali invernali : donna, uomo bambino, comprese scarpe sportive . Offerta speciale per il mese di FEBBRAIO 2021.Imballaggio : sacchi da 25 Kg
Non-woven insole material Furniflex is a registered trademark of FURNITUR-BY LLC.
Furniflex is intended for the production of basic and insert insoles, and is also used as gaskets to strengthen the sides of bags and backpacks.Thickness of insole board:
0.9mm / 1.0mm / 1.2mm / 1.5mm / 1.75mm / 2.0mm / 2.25mm / 2.5 mm
Size of sheet:
1500mm x 1000 mm
Contacts:
+375 (17) 336-10-21
+375 (17) 336-92-27
+375 (17) 336-10-05
+375 (17) 336-10-02
info@furnitur.by
FG-Flex (furnitur-group) is a line of non-woven insole materials that are truly revolutionary products developed with the participation of the leading laboratory of the Federal State Institution “Rostest-Moscow”. FG-Flex (furnitur-group) - is a registered trademark.
FG-Flex (furnitur-group) is used for the production of basic and insert insoles of various fastening methods in the shoe industry. Also, the material has been successfully used as various inserts parts in the leather goods industry (reinforcing the sides of bags, backpacks, suitcases and other products).
This material is made of fiber (non-woven base) impregnated with a latex polymer. FG-Flex (furnitur-group) has high strength and waterproof characteristics. It is able to take its original form after drying and is a quality alternative to cellulose boards.
Excellent quality and low price makes FG-Flex (furnitur-group) the best offer on the shoe insole board market.
Thickness of insole board:
0.9mm / 1.0mm / 1.2mm / 1.5mm / 1.75mm / 2.0mm / 2.25mm / 2.5mm / 2.8mm
Size of sheet:
1500mm x 1000 mm
Contacts:
+375 (17) 336-10-21
+375 (17) 336-92-27
+375 (17) 336-10-05
+375 (17) 336-10-02
info@furnitur.by
FURNITUR-BY LLC is the only company in the Republic of Belarus that produces decorative accessories, jewelry, art products, key rings, badges, souvenir products, etc. centrifugal casting on the latest Italian equipment. The uniqueness of this casting method in the possibility of producing small batches (from 100 units) and a high production speed of equipment (molds) for casting, not more than 5 working days. The manufacturing of equipment (molds) can occur both according to the customer’s model and on the basis of the developed models and 3D models by our designers.
Casting material - ZAMAK 4-1
Casting accuracy up to 5 cells according to GOST 26645-85
Methods of coating products: electroplating, paint according to RAL
The weight of the casting part may not exceed 150 g / pc.
Dimensions of parts (LxWxH) not more than mm. (100x100x25)
Contacts:
+375 (17) 336-10-21
+375 (17) 336-92-27
+375 (17) 336-10-05
+375 (17) 336-10-02
info@furnitur.by
FURNITUR-BY LLC is the only producer in the Republic of Belarus of decorative rivets in a combined way.
There are several options for making decorative rivets.
Option 1: the decorative part of the product is poured to the rivet shank, which serves as an ornament, and the installation and fastening of such an ornament occurs as a regular rivet on a head.
Option 2: we make the casting of the workpiece, followed by gluing to the product of rhinestones, artificial stones, stickers of various subjects or with laser engraving, and the installation and fastening of such an ornament takes place like a regular rivet on a head.
Because of using of three sizes of rivet shanks, we make products that are installed on a different package of thicknesses of natural or artificial materials.
Contacts:
+375 (17) 336-10-21
+375 (17) 336-92-27
+375 (17) 336-10-05
+375 (17) 336-10-02
info@furnitur.by
It is possible to produce decorative plates with a different method of installing them to the product:
• fastening to the product by sewing;
• fastening to the product with "mustache" one or more;
• fastening to the product on the casting shanks from a ZAMAK (shank) + head of rivet;
• fastening to the product on the shanks (shank) of the rivet attached to the plate + head of rivet.
This respirator mask is certified and classified in accordance with BSI's PPE for Healthcare Professionals 2020/403 - Respiratory Protective Equipment Technical Specification and therefore carries the CE mark. Certification under Module B, EU Type-Examination and Module C2, EC Quality Control, will be issued by BSI Group The Netherlands B.V., Say Building, John M. Keynesplein 9, 1066 EP, Amsterdam, Netherlands (Notified Body Number 2797).
Module B Certificate No. CE 728354
Module C2 Certificate No. CE 728374
To technical specifiction Annex II (EHSR) of the PPE Regulation (EU) 2016/425. PPE for use by health care professionals as per Commission Recommendation 2020/403.
This filtering half mask is manufactured for COVID-protection only. This filtering half mask is not a PPE device for general useand shall not be used for purposes other than protection against COVID-19.
EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols.
FFP2 masks have a minimum of 94% filtration percentage and maximum 8% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
Features:
VIRGIN plastic materials made and odorless.
This respirator face mask offers a flexible nose piece that helps form a closure for better protection against exposure.
CE approved and FFP2 class, not reusable.
This respirator half face mask is for use by healthcare workers, first responders and other personnel involved in the efforts to contain the COVID-19 virus and avoid its further spread.
Vertical-fold flat, easy storage and transportation in a pocket.
Features:
High-Density knit continuous filament polyester-nylon microfibers (70% polyester + 30% nylon).
Soft-texture microfiber cleanroom wipes have tiny microfibers that cling to even the smallest contaminant particles without scratching the surface.
The soft, durable wipes are optimally suited for scratch-sensitive surfaces as well as for fine cleaning of small components. Laser-cut sealed edges ensure no lint is left behind
High absorptive capacity and rapid absorption rate
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipers is brought in workshops.
Wrap the edges to the upper middle of wipers before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
Features:
Woven short filament polyester-nylon microfibers (70% polyester + 30% nylon).
Low elasticity.
Wear-resistant, strong polishing capacity.
Extra-low lint.
High absorptive capacity and strong chemical resistance
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipers is brought in workshops.
Wrap the edges to the upper middle of wipers before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
Features:
Knitted low-elasticity continuous filaments of 100% polyester (stripe grain or grid grain).
Stripe grain wipes are suitable for sensitive surface production.
Grid grain wipes are suitable for wiping stubborn stains
Good absorbency and high efficiency
Work well with IPA, acetone and other solvents
Laser sealed edges ensure an ultra-low level of lint.
High absorptive capacity and rapid absorption rate
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipes is brought in workshops.
Wrap the edges to the upper middle of wipes before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
Features:
Interlock knit 100% continuous filament polyester microfibers.
Soft-texture polyester microfiber cleanroom wipes have tiny microfibers that cling to even the smallest contaminant particles without scratching the surface.
The soft, durable wipes are optimally suited for scratch-sensitive surfaces as well as for fine cleaning of small components. Laser-cut sealed edges ensure no lint is left behind
High absorptive capacity and rapid absorption rate
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipers is brought in workshops.
Wrap the edges to the upper middle of wipers before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
Features:
Interlock knit continuous filament polyester-nylon microfibers (70% polyester + 30% nylon).
Soft-texture microfiber cleanroom wipes have tiny microfibers that cling to even the smallest contaminant particles without scratching the surface.
The soft, durable wipes are optimally suited for scratch-sensitive surfaces as well as for fine cleaning of small components. Laser-cut sealed edges ensure no lint is left behind
High absorptive capacity and rapid absorption rate
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipers is brought in workshops.
Wrap the edges to the upper middle of wipers before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
Features:
Knitted low-elasticity continuous filaments of 100% polyester (stripe grain or grid grain).
Stripe grain wipers are suitable for sensitive surface production.
Grid grain wipers are suitable for wiping stubborn stains
Good absorbency and high efficiency
Work well with IPA, acetone and other solvents
Laser sealed edges ensure an ultra-low level of lint.
High absorptive capacity and rapid absorption rate
Production process:
Laser/ultrasonic sealed edges ensure lint-free.
Laundered with 18 MΩ pure.
Packaged in class 100/1000 (ISO5/6) cleanrooms.
Professional static clean technology ensures the lowest containing of particles.
Pre-cautions:
Double chamber vacuum packaging. The outer chamber should be taken away before a pack of cleanroom wipers is brought in workshops.
Wrap the edges to the upper middle of wipers before wiping because the edges may damage the product surface to be wiped.
Do not cut any wipe by yourself because it will cause lints from the cut edge
Keep away from fire, and do not wipe high-temperature surfaces.
